Started 11th February 2019
" It came with 0-ohm jumpers (R1,R2,R9,R10) installed which are for the EP2C8 device not EP2C5; so I just removed 'em to restore those pins to user I/O functionality. "
Cheap FPGA dev board
Getting started with the EP2C5 Cyclone II Mini Board
EP2C5 Cyclone II Mini Board schematic
FPGA course
Getting Started with VHDL and the Cyclone II EP2C5 Mini Dev Board - You Tube
Getting into FPGAs - Quick-start guide for the EP2C5 Cyclone II Mini Board
Blink for Altera Cyclone II EP2C5T144 Mini Development board
Comments
Page last modified on February 15, 2019, at 01:37 AM
Powered by
PmWiki